note

528Currently online
81Today's Reading
43Share Today
Multilingual display

How to dismantle the wind wheel of Midea range hood

2018-04-22 08:01:00

Remove the front panel. The glass panel is an assembly of tempered glass and sheet metal parts bonded together, and the key switch and control panel are fixed on it; The glass panel is fixed with the main shell by the lower hook and the upper two screws;

Methods/Steps
1

Use a Phillips screwdriver to remove the two screws fixing the glass panel and lift the panel. Then unplug the connector of the control cable

2

Place the glass panel face down and remove the two screws fixing the key switch with a screwdriver to remove the switch; Remove the four screws fastening the control panel to remove the control panel.

3

Then remove the four screws fixing the air inlet ring and remove the air inlet ring; Hand grip nut clockwise to remove the hand nut and then hand impeller along the axis of outward force, you can remove the impeller.

4

Remove the capacitor. Use a screwdriver to remove the screws securing the capacitor, and then remove the connector connecting the motor to the capacitor.

5

Remove the motor. Use a screwdriver to remove the two screws fixing the cable protection cover and remove the cable protection cover. Remove the three screws fixing the motor cover and remove the motor cover; Then remove the four screws fixing the motor, the motor can be separated from the shell;

6

Remove the power cord. Use a Man-shaped screwdriver to remove the two Man-shaped screws fixing the power cable. Then remove the ground screw on the power cord; Then disassemble the wires.

Recommendation